Liebherr MRB-2400 Guide de l'utilisateur Page 18

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 19
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 17
34 35
Toe Kick and
Ventilation Requirements
All Monolith ventilation takes place through the Toe
Kick area. Door panels must be a minimum of 4" above
the floor. Do not block grill in Toe Kick area.
Liebherr offers a 4" (102 mm) tall Toe Kick matching
the width of the Monolith columns, and possible Side-
by-Side combinations, as an accessory. Please refer
to page 27 for Toe Kick accessories ranging from 18"
to 54" width.
The Monolith appliance comes with dividers that must
be installed on the appliance and onto the door, in
order to separate the warm exhaust air from the fresh
incoming air.
Door Clearance Requirements
It is fundamental that the Monolith appliances are
installed so the doors (including handles) and adjacent
cabinets, countertops, walls, or other kitchen elements
do not collide with one another when doors open.
In case of door collision, a door limitation of 90° may
be used. Please refer to the User Manual on how to
limit the door opening.
Additional solutions include:
Reduce the door panel thickness if it is larger
than 3/4" (19 mm).
Rearrange the element that is colliding with the
appliance.
Use a bumper or stopper to prevent the door from
damaging the adjoining wall or cabinet.
Panel clearance
Frameless installation style
Panel thickness 3/4"
Top view
A = 3/4" gable
B = Front panel door closed. 5/16" (8 mm) overlapping.
Dash line shows an overlapping of 7/8" (22 mm).
This overlapping is solely if the appliance is at the end of a line of cabinets.
C = Front Panel 90°
D = Front panel at max. door opening angle of 11
IMPORTANT
The gap between the appliance front panel and the surrounding furniture panels
must be at least 1/8" (3 mm).
A = Appliance housing
B = Front panel door closed
C = Front Panel 90°
D = Front panel at max. door opening angle of 11
Panel clearance
Panel thickness 3/4"
Top view
Vue de la page 17
1 2 ... 13 14 15 16 17 18 19

Commentaires sur ces manuels

Pas de commentaire