Liebherr HC1050B Guide de l'utilisateur télécharger pdf (Page 32)

Fully Integrated

24" and 48" Models: HF 861 / HRB 1120, SBS 19H1

Ventilation Requirements

This is a fully integrated refrigerator-freezer which means that it

is fully enclosed by a kitchen cabinet. This type of cabinet must

be carefully constructed using the correct dimensions and it

must provide suitable ventilation to ensure proper appliance

operation.

NOTICE

If the following ventilation dimensions are

not observed the compressor will be dam-

aged.

Kitchen Cabinet Airﬂow

1. The following ventilation dimensions must be observed:

There must be a ventilation space at least 31 in.² (200 cm²)

at the airﬂow inlet (1) and at the airﬂow outlet (2).

The top ventilation space can be directed in one of the fol-

lowing ways:

A) Directly over the appliance (2) with either an optional fac-

tory air vent or custom made one.

B) Above the cabinet and below the ceiling (3).

C) Through a vent installed in a sofﬁt (4).

A minimum space of 1 1/2" is required when a cabinet is built

above and/or underneath.

B - Side view

Cabinet

Refrigerator

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 45 46

Pas de commentaire

Liebherr HC1050B Guide de l'utilisateur Page 32